Industrial Line
Elevating Tripod for Laser Scanners
Unlike rotating lasers which are set up once a day and which remain unchanged in that position all day long, laser scanners require elevating tripods that allow to easily lift and lower heavy-duty laser scanners continuously. When working with laser scanners, elevating tripods have to cope with a higher load applied which results in more wear and tear especially in the gear unit. Industrial Line is a new series of tripods perfectly adjusted to meet the special requirements of laser scanners or heavy-duty instruments.
Features:
- Indirect gear to easily lift and lower heavy instruments
- Reinforced gear unit for extra durability and less wear and tear
- Twist proof elevating column with centric clamp
- Tripod legs made of strong aluminium profiles and leg struts for extra stability
- Combi shoes for all terrain use
Technical data:
- Min. effective height approx. 1.13 m
- Max. effective height approx. 2.76 m
- Retracted lenght approx. 1.28 m
- Weight approx. 9.3 kg
- Holding screw: 5/8’’ thread
- Tripod plat, Ø 110 mm
- Tripod head and joints made of aluminium
- Adjustable column range 910 mm
- mm graduation on telescopic tube
Ref.-No. 210700
Two Way Tripod for Laser Scanners
Nedo Industrial Line elevating tripod is designed especially for the use of 3D laser scanners. The laser scanner can be mounted either at the top or at the bottom of the elevating column ensuring maximum flexibility. When mounted at the top, the laser scanner can be easily lifted to the desired working height. The indirect gear unit allows for maximum convenience. For stability reasons, the maximum working height is limited to 4 m.
For shaft applications, the column can be turned and the laser scanner mounted at the bottom of the elevating column and inserted from above the shaft cover into the shaft compartment. The toothed rack extends to almost any length. Additional rack elements are inserted into the elevating head and securely connected to the previously inserted toothed rack element with the aid of an innovative locking device.
For even more comfort, the laser scanner can be lifted with a cordless power drill. A proper screw bit to replace the crank is supplied as a standard. Needles to say that the Industrial Line elevating tripod is equipped with a twist proof elevating column with centric clamping and combi tripod shoes for all-terrain use.
Technical specifications:
- Min. effective height approx. 1.12 m
- Max. effective height approx. 5.00 m
- Depth of shaft approx. 4.00 m
- Retracted length approx.1.21 m
- Holding screw: 5/8’’ thread
- Tripod adapter: 3/8’’ thread
- Weight approx. 8.9 kg
- Tripod plate flat, Ø 110 mm
- Tripod head and joints made of aluminium
- Use of the laser scanner above and below the elevating tripod
- mm graduation on telescopic tube
- Twist proof elevating column with centric clamp
- Suitable for shafts with a diameter of 205 cm
Ref.-No. 210710
Optional accessories for Industrial Line Two Way Tripod
Adapters for Laser Scanners
Depending on the weight, overhead mounting of a 3D laser scanner on a two way tripod with a 5/8’’ socket may be difficult. To make this easier, adapters can be supplied as optional accessories for various laser scanners. They permit safe and easy attachment to the tripod.
Nedo Adapters for Laser Scanners
| Ref.-No. | |
| 660040 | Holding screw: 3/8’’ and 5/8’’ thread Adapter for Faro Focus 3D, X30, X130, X330, M70, S70, S150 and S350 |
| 660041 | Adapter for Leica HDS6200, HDS6100 and HDS7000 as well as Zoller and Fröhlich Imager 5010 |
| 660042 | Adapter for Leica Scanstation P20, P30 and P40 as well as Zoller and Fröhlich Imager 5016 |
| 660043 | Adapter for für TRIMBLE TX8 |
Tripod Dolly
Sturdy tripod dolly with large steerable and lockable wheels. The points of the tripod are placed in the recesses provided and the feet are secured with a flexible strap. Easy, safe and convenient.
The tripod dolly has only two shanks, allowing it to be maneuvered through narrow doors and providing easy access to a laser scanner. For shaft applications the shaft diameter shall not exeed 95 cm. The dolly can be folded up to save space in transport.
Ref.-No. 660 030
