Nedo PRIMUS 3 HVA2N
The fully automatic horizontal/vertical dual slope laser with AutoAlign function, FindX, AutoTarget and PlaneLock X/Y.
Features:
- Robust, motor-powered levelling
- Inclinations in one or two axes with convenient % input for X and Y axes with 3 decimal places.
- TemperatureControl: Automatic temperature compensation
- SegmentControl
- PlaneLock X/Y: the tilt level is not monitored by the tilt sensor, but by COMMANDER 3. Advantageous in continuous use.
- AutoTarget function (Y-axis) for automatic axis alignment
- FindX: simple and precise alignment of the X-axis
- AutoAlign: Automatic alignment of the laser beam to the receiver. In the horizontal plane for measuring and storing the slope of the terrain in both axes (X and Y). In the vertical plane, ideally suited for batter board application and facade construction.
- Tilt control: the position of the laser plane is continuously monitored in the slope mode and re-levelled if necessary.
- Slope value once input is stored beyond switch-off
- Automatic level control stops the laser if it receives a heavy jolt. In this way, height errors are avoided.
- Available with highly visible high-power laser diode (laser class 3R) or with bright beam technology (laser class 2)
- COMMANDER 3 with large reception field. For complete remote control of the PRIMUS 3
- Large, clear display showing inclination, rotation speed, battery level, etc.
Perfect for levelling and aligning jobs, especially in the following areas:
PlaneLock X/Y
PlaneLock X or PlaneLock Y leads to better results when working in slope mode over a longer period of time and with particular precision, as environmental influences on the sensitive sensors of the slope
laser are avoided.
On PRIMUS 3 H1N, H2N or HVA2N, slope is set in the desired axis. COMANDER 3 is brought into the laser plane and PlaneLock is activated. COMMANDER 3 then holds the laser plane at the set inclination
while the other axis is aligned exactly horizontally. This function is extremely helpful, especially when creating a fine plane.
Nedo PRIMUS 3 HVA2N
| Technical Data: | |
| Levelling accuracy | ± 0.5 mm/10 m |
| Self-levelling range | approx. ± 8.5° motor-powered, with automatic level control |
| Setting of slope function (x/y-axis) | ± 15% |
| Accuracy of the slope function | better than ± 0.015% |
| Working range Ø | approx. 700 m with receiver COMMANDER 3 |
| Laser |
< 5 mW, laser class 3R, 635 nm or < 1mW, laser class 2, 635 nm |
| Working range radio remote control | up to 150 m |
| Working range AutoAlign | up to 150 m |
| Rotating speed | 600 rpm, 900 rpm or 1200 rpm |
| Protection class | IP 67 |
| Power supply | Li-ion rechargeable battery |
| Operation duration | up to 40 h |
| Connecting thread | 5/8’’ |
